Insect screens for Camec wind-out windows are removable, fully flexible and can be washed as required. They are high frequency welded and are an integral part of the window. Note: Top screen of all double hopper windows have square bottom corners and all single hopper and the lower screens of double hopper windows have round bottom corners.

Description

Wind-out windows comes standard with standard FLY SCREENS. The bottom corners may be round or square depending on your existing screen. Check screen NOT the window.

IMPORTANT INFORMATION ON HOW TO MEASURE YOUR WINDOWS FOR THE CORRECT SIZE FLYSCREENS.

**The size listed is to suit window cut out size. Actual measurements of the fly screen is 20mm less. 

*MEASURE TOP TO BOTTOM AND LEFT TO RIGHT OF THE INSIDE YOUR CARAVAN WINDOW.
THE FLYSCREENS ARE MADE TO SUIT THE WINDOW SIZE AND ARE NOT ABLE TO BE ORDERED FROM MEASURING THE ACTUAL FLYSCREEN ITSELF.

Installation

These can be replaced by fully opening the window, placing a butter knife under a rubber edge (from outside the RV) and peeling off. Take care near the centre at the top as this is where the join is.

It is best to the soak the new screen in a bucket of warm water and start the installation at the top corners - it just presses onto the lip. You may need to use a flat screw driver to run along the top edge if your fingers will not fit in the gap.